You could be forgiven for thinking that your ductwork is as clean as a whistle. After all, it looks it from the outside, doesn’t it? But HVDS engineers, who have helped customers the length and breadth of the country, know that external appearance can be deceptive. Our Hygiene Team have removed a variety of substances from air handling system ductwork as part of their cleaning and maintenance service, thus improving the efficiency of the system, reducing the energy usage of the production area and optimising food safety and the health and safety of employees.
It obviously depends on what you are producing as to what lurks inside your ductwork. A recent visit to a baked goods factory revealed a build-up of mould and bacteria inside their fabric ducting. HVDS engineers removed the air socks and rather than launder them, the socks were condemned, and replacement socks were installed in the relevant production areas. The engineers also removed any debris and sanitised all other relevant parts of the Air Handling Unit to ensure maximum hygiene. All this was achieved for the factory just ahead of a major audit. Read the case study here.
At a morning food manufacturing site, a steel duct had burst under the pressure of a build-up of dust inside it. HVDS Technical Engineers arrived on site within 24 hours. When we investigated further, we found that the ductwork across the whole system was clogged with dust from production, resulting in a serious reduction in machine efficiency. Our engineers stripped down the machinery and carried out a massive clean-up exercise. It is worth noting that dust from the ductwork explosion had been dispersed across four floors of the production facility, causing a major food safety and cross-contamination hazard. Some food dusts are flammable under certain circumstances, and a resulting fire could have much worse consequences. Read the case study here.
Grease in flue extract systems can be a problem if not cleaned regularly. The photo below shows build-up in the ductwork at one UK food manufacturing site. In places the extracted product reached a depth of 3 inches or more. The grease & carbon was removed using scrapers, brushes and vacuums. In total, around 10 gallons of fluid grease and foreign matter was removed from the ductwork and extraction flue system over a period of 5 days. Read the case study here.
Our BESA qualified engineers work in accordance with industry standards, using cutting edge techniques, such as mechanical cleaning, rotary brushing, compressed air jetting and traditional hand cleaning. Internal ductwork inspections can be carried out via camera probe.
For more information about our HVAC and LEV hygiene and maintenance service, take a look here or download our brochure here. To contact us for advice or to book your visit from our Hygiene Team, please get in touch here.